The Reasons For The Good Airtightness Of Rubber O-rings And The Airtight Structure And Working Principle

Jul 29, 2022

Leave a message

The airtightness of rubber O-rings has always been an important information in the market. Below, Qianlang Rubber will introduce the reasons for its good airtightness, its airtight structure and working principle.


Rubber O-rings have always been an important product in the domestic sealing equipment market, occupying a large part of the domestic market share. Of course, this is inseparable from its own superior performance. The rubber O-ring generally used in pump and valve equipment is very simple in structure, so the manufacturing process is simple, and the cost is greatly reduced, so it can better adapt to the installation and use requirements in practical applications, and it is easy to disassemble, so coupled with good It has become a popular product in the sealing market.


The rubber O-ring is generally installed in the groove. If the design size is inaccurate and the size is out of tolerance, because there is a certain compression, it is likely to cause the surface of the rubber O-ring and the groove contact surface to be unconstitutional. If the sealing effect is not optimal or the compression of the rubber O-ring is too large, it is squeezed by individual stress on the edge of the groove, causing direct damage to the rubber O-ring, and the sealing effect will be greatly reduced, and the cost of use will also increase. Great rise.


In the sealing work, the rubber O-ring is also often in contact with the oil. If the anti-corrosion performance is not good, it is very easy to be corroded by the oil, resulting in poor elasticity and affecting the sealing effect.


When the pressure of the liquid in the seal is greater, the deformation of the rubber O-ring is greater, so that the pressure on the sealing surface during the sealing process will also increase gradually, so the sealing effect is more obvious, which is also the rubber O-ring can An important reason for a good sealing effect.


I hope these contents can help you understand the reasons for the good airtightness of rubber O-rings, as well as the airtight structure and working principle. You can customize it according to your own requirements. Our Qianlang Rubber has a professional engineer team to customize it for you.