Nowadays, O-rings and gaskets are widely used in industry and life. Sometimes we are confused, which sealing effect is better? Let's take a look at their similarities and differences.
Similarities between O-rings and gaskets:
Both meet this implicit condition: when the sealing contact pressure is greater than the pressure of the sealed medium, the sealing effect is maintained;
When the sealing contact pressure is lower than the pressure of the sealed medium, the gasket or O-ring is pushed open, and a large amount of medium leakage occurs.
Differences between O-rings and gaskets:
The flat gasket seal consists of gaskets, flanges and bolts, forming a complex statically indeterminate system; the sealing contact pressure is provided by the deformation of the bolts. When the flat gasket is working, the contact pressure distribution is uniform. When the medium pressure fluctuates and is greater than the contact pressure, leakage may occur.
In contrast: for the condition of constant pressure, both can be matched;
However, for variable working conditions, when the pressure rises, it may exceed the contact pressure range of the gasket, and the medium will leak from the top-opening sealing gap. O-ring finish burst gasket.
In application, the gasket is only used for static sealing, and the O-ring can be used for both static sealing and dynamic sealing of reciprocating linear motion.
In terms of design, the traditional method of gasket sealing design is not strict enough, and the new flange gasket design specification is in the process of experimental research; the design of the O-ring only needs to check the design manual, which is simple, reliable, convenient and practical.
In fact, whether it is an O-ring or a gasket, the most important thing is that it is suitable and can be better used for its sealing effect. Our Qianlang Rubber is tailor-made according to the real needs of customers, and we also have a professional team of engineers tailor-made for you.
