The Sealing Effect Of The Sealing Ring In Different Occasions

May 14, 2021

Leave a message

The sealing ring is a kind of sealing element with two-way effect. In the process of the equipment, the initial contraction in the radial or axial direction makes the sealing ring effective. The sealing ring can highlight its effect in static sealing occasions, and in dynamic occasions, the sealing ring is also widely used, but it will be restricted by the speed and pressure of the seal.


Sealing rings are widely used in machine tools, ships, cars, aerospace equipment, metallurgical machinery, chemical machinery, construction machinery, construction machinery, mining machinery, petroleum machinery, plastic machinery, agricultural machinery, and the appearance of various instruments.


The sealing ring has a sealing effect in a groove with a rectangular cross-section on the outer circle or the inner circle.


The sealing ring still has an excellent sealing and shock absorption effect in oil, acid and alkali, abrasion, chemical corrosion and other environments. Therefore, the sealing ring is a widely used seal in the hydraulic and pneumatic transmission system.


Sealing rings are used on mechanical parts to avoid leakage of liquid or gaseous media under suspension conditions. Under other conditions, sealing rings can also be used as dynamic sealing elements for axial reciprocating and low-rotation movements. In different conditions, the materials used in the sealing ring are different.


Generally try to choose a large cross-section seal ring for use, because under the same gap, the volume of the seal ring squeezed into the gap should be smaller than the larger value it is squeezed into.


The sealing ring should have an outstanding sealing function within the working pressure and a certain temperature scale, and can actively advance the sealing function with the increase of pressure.


The conflict force between the sealing ring equipment and the moving parts should be small, and the conflict coefficient should be stable. The sealing ring has strong corrosion resistance, is not easy to age, has a long operating life, and has good wear resistance. After wear, it can actively compensate to a certain extent, so that the sealing ring has a longer life.


The manufacturing method of the sealing ring is still mainly produced by the over-molding method, during which the vulcanization methods of molded products mainly include flat molding, transfer molding and injection molding.


According to its characteristics, the sealing ring adopts flat molding as the molding method. During the molding and vulcanization process, it is necessary to grasp the temperature, time and pressure of vulcanization, and pay attention to the changes of temperature and other parameters in the vulcanization process at any time, and deal with it accordingly, otherwise it will constitute If the product is under-sulfur or over-sulfur, if the active control system is selected, the entire vulcanization process will be actively recorded and controlled to ensure that the product reaches the level of positive vulcanization.