The Main Factors Affecting The Service Life Of Rubber Seals

Jun 04, 2022

Leave a message

The service life of the rubber seal mainly depends on its anti-aging properties. Rubber is a high elastomer with unsaturated molecular structure. It is easy to chemically react with ozone, oxygen and other active substances in the air, resulting in the rupture of the rubber molecular chain, cross-linking and other aging phenomena, thereby causing the product to lose elasticity and lead to seal failure. The aging of rubber can be divided into oxygen aging, thermal aging, ozone aging, light effect aging, deformation and stress aging, heavy metal catalysis, oxidation aging, hydrolysis aging, and mold erosion.

The service life of rubber sealing ring is generally divided into long life, medium life and short life. For example, when the life of the lip seal ring of the rotating shaft is greater than 1000h, it can be called long life; 400~600h when it starts to leak, it is called medium life; if it leaks within 100h, it is called short life. If the radial lip seal is used for more than 1000h, it can be called long life; 400~800h is called medium life; 100h or less is called short life.

Choose appropriate rubber sealing ring, its service life can reach medium and long life. At this time, the main reason for the failure of the seal is the aging of the rubber material or the wear of the lip of the seal. The failure of seals with a service life of less than 100h is usually due to improper selection of the surface roughness of the seal structure, elastomer or shaft.

The main factors affecting the failure of rubber seals

1. Model selection and assembly quality

Improper selection and selection of unqualified seals (such as poor lip, local deformation, hardening; self-tightening spring corrosion and unqualified size, etc.), often appear to replace a bad one. In addition, during assembly, local deformation of the seal caused by forced pressing, and the sealing surface is scratched by burrs on sharp edges such as splines and threads, etc., will cause seal failure.

When selecting, the shape, type and material of the sealing ring should be reasonably selected according to the type of seal, the type of working medium, pressure, temperature, and the relative movement speed between the two dual parts being sealed.

Before assembly, carefully check whether the selected seals are expired, aged, deformed, etc. At the same time, each sealing surface should be thoroughly cleaned, and the assembly place should be free of pollution and sand; during assembly, use special tools to press in to ensure that the seal and the shaft The concentricity of the shaft, especially when there are threads, keyways and splines on the shaft, must be inserted with a guide sleeve.

2. Improper selection of oil and pollution

Improper selection of the oil is mainly manifested in the compatibility with the rubber sealing ring. If the oil used has poor compatibility with the seal, it will accelerate the deterioration of the rubber compound, the swelling and aging of the seal, and the generation of unsinkable sludge. The wear of the seal causes the seal to fail. Therefore, the compatibility with rubber materials must be paid attention to when selecting oil.

3. Improper management of seals

The chemical composition of the rubber seal determines that the storage and management must meet the specified requirements. The investigation found that the unreasonable management of the placement, storage and transportation of the rubber sealing ring was the main factor causing the early failure of the seal. Therefore, attention must be paid to the daily management of rubber sealing rings.

4. Other factors

(1) Working temperature and environmental conditions

The working temperature of the oil in the system and the temperature around the seal are too high, which can easily cause the rubber to soften, expand, harden and crack; in addition, the harsh external environment and a lot of dust will cause different degrees of wear and tear on the lip of the seal. injury phenomenon.

(2) Air is dissolved in the system

If there is air in the system, a large number of air bubbles will be generated in the oil. When the air bubbles reach the inner pressure surface of the seal, a large amount of energy will be released rapidly, resulting in serious damage to the lip of the seal; in addition, if the oil in the system When there is too much steam, and the pressure and temperature reach a certain value, it will cause the oil to "self-ignite", resulting in the ablation or melting of the seal support ring, the anti-extrusion ring, and the partial carbonization of the rubber seal.