As a traditional rubber variety, natural rubber has good elasticity, high strength, high wear resistance, high tensile strength, and elongation at break, and can be used for production in an oil-free and non-corrosive environment at -20℃~100℃ The abrasion resistance of the rubber seal ring directly affects the sealing effect and use time of the rubber seal ring.
So how to further improve the wear resistance of natural rubber seals in actual production?
1. Adjust rubber elasticity
In order to reduce the cost of rubber products, natural rubber product manufacturers will fill a large number of rubber fillers, but an excessive amount of rubber fillers will reduce the elasticity of the rubber. It is necessary to control the amount reasonably, appropriately improve the elasticity of natural rubber, and reduce the viscosity and hysteresis of the rubber. Reduce the coefficient of friction and improve the wear resistance of natural rubber seals.
2. Appropriately increase the hardness of rubber
Increasing the hardness of natural rubber can enhance the resistance to deformation of the rubber. The seal ring and the contact surface can be in uniform contact under the action of stress, and the wear resistance is improved; in general, many natural rubber seal ring processing companies usually increase the amount of sulfur to improve Rubber hardness. It should be noted that the hardness of the natural rubber sealing ring should not be too high, otherwise the elasticity and cushioning effect of the sealing ring will be affected, which will eventually lead to a decrease in wear resistance.
3. Adjust the degree of vulcanization
According to the vulcanization performance characteristics of natural rubber, rubber product manufacturers reasonably adjust the vulcanization system and vulcanization parameters of natural rubber seals to increase the degree of vulcanization and finally achieve the goal of improving the wear resistance of rubber seals.
4. Improve the tensile strength of rubber
When using natural rubber to produce rubber sealing rings, the use of fine-particle rubber fillers in the formulation can increase the intermolecular force, and increase the wear resistance of natural rubber to a certain extent by improving the tensile strength and tensile stress of the rubber.
5. Reduce the surface friction coefficient of natural rubber sealing ring
A small amount of graphite, molybdenum disulfide, and other materials are added to the natural rubber seal ring formula to reduce the surface friction coefficient of the rubber seal ring and improve the wear resistance of the seal ring.
