Home > News > Content
Rubber Hoses Hose Varieties Are Complex
Jun 30, 2017

Rubber Hoses Hose varieties are complex

Large diameter hose products, which also belong to the classification of one of the hose, we know that the hose variety is complex, diverse structure, combined with the use of different conditions, so the length of life of the hose, not only depends on the quality of good or bad, but also decided to use maintenance. For the application of large diameter hose is also true, in order to be able to use it properly, to achieve better application results, in its use need to pay attention to the following:

1, hose and hose assembly of the media temperature under normal circumstances, should not exceed -40 ℃ - +120 ℃, otherwise it will reduce the service life.

2, large diameter hose assembly should not be less than the minimum bending radius of the hose to avoid bending or bending near the pipe joints, otherwise it will hinder the hydraulic transmission and transportation of materials or damage hose assembly.

3, hose and hose assembly, should not be used in the reverse state.

4, hose and hose assembly should be handled with care, should not be dragged on sharp and rough surface, should not bend and flatten.

5, large diameter hose assembly should be kept clean, the internal should be rinsed (especially the acid tubing, spray tube, mortar). To prevent foreign objects into the lumen, hinder the delivery of fluid, damage to equipment.

Add time: 2017-03-06

304 stainless steel metal hose with light weight, high pressure, high and low temperature resistance, corrosion resistance, high flexibility and many other advantages; therefore has anti-vibration, anti-bending characteristics, can play a compensatory shift, the role of absorption stress. It is suitable for the transportation of various kinds of fluid, such as air and steam, and the circulation of water, oil and medicine. It plays an important role in the reciprocating movement of piping system, the absorption of thermal expansion and the adjustment of piping.

Add time: 2017-03-06

First of all, according to the use of hose conditions, the correct choice of hose varieties, specifications, do not wrong or substitute; Second, the pressure should be balanced, do not suddenly increase the pressure leaving the tube suddenly due to excessive pressure And damaged. If you need to transfer the workplace, no hard pull, hard drag, so as not to damage the outer layer of the hose, and thus damage the internal skeleton layer; re-bending radius should not be less than a given radius of bending, so as not to damage the skeleton layer.

Note the editor

First, the use of rubber hose Note:

1, be sure to use rubber hose within the recommended temperature and pressure range.

2, the hose with its internal pressure expansion and contraction, please cut the hose into a slightly longer than you need.

3, when applying pressure, please slowly switch any valve to avoid the impact pressure.

4, rubber hose in the bending radius above the conditions used, otherwise it will cause the hose to break, reduce the pressure resistance.

5, the use of powder, particles, according to the conditions may produce easy wear, please try to enlarge the bending radius of the hose.

6, in the vicinity of metal parts, do not use in extreme bending state.

7, do not touch the hose directly or near the fire.

8, please do not use the vehicle pressure pressure hose.


Products List